Need help?Do you have a question about the NAIM CDX and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Outputs | Analogue, Digital |
| Analogue Outputs | RCA |
| Wavelength | 780nm |
| DAC | Burr-Brown PCM1702 |
| Disc compatibility | CD, CD-R |
| Phase Response | Linear |
| Laser Type | Semiconductor |
| THD | <0.01% |
| Total Harmonic Distortion | <0.01% |
Guidance on using Naim's standard interconnect and loudspeaker cables for optimal performance and safety.
Proper procedure for powering Naim equipment on and off to protect components and ensure safety.
Information on the break-in period for Naim equipment to achieve optimal performance.
Advice on mains connections, fuse ratings, and dedicated circuits for best performance.
Recommendations for positioning Naim equipment to avoid interference and ensure stability.
Guidance on resolving issues and contacting dealers for support.
Important warnings regarding lightning strikes, liquids, and unauthorized modifications.
Detailed instructions for correctly wiring the mains lead to the plug.
Guidelines for handling and disposing of non-rewireable mains plugs safely.
Information on replacing fuse carriers and using appropriate plug fuses for safety.
Explanation of the front panel buttons: display, previous, next, pause, stop, play.
Description of indicators like track, time, repeat, and program on the CD player display.
Instructions for using and removing transit screws for safe transport.
Steps for placing a CD on the platter and securing it for playback.
Steps for closing the door and initiating playback on the CDS player.
Explanation of front panel buttons: previous, next, stop, play, pause, repeat, program.
Description of indicators on the CDX player display: pause, time, repeat, program.
Wiring diagrams for connecting the CDX player to a preamplifier and XPS power supply.
Instructions for removing and replacing transit screws on the CDX player.
Steps for loading a CD, placing the clamp, closing the door, and starting playback.
Explanation of front panel buttons: previous, next, stop, play, pause, repeat, program.
Description of indicators on the CD5 player display: pause, time, repeat, program.
Wiring for CD5 player, including RC5 input and connection to Flatcap 2 power supply.
Instructions for removing and replacing transit screws on the CD5 player.
Steps for loading a CD, placing the clamp, closing the door, and starting playback on the CD5 player.
Keys that switch soft key modes for preamp, CD, or tuner components.
Keys that operate specific functions regardless of component mode, like volume and mute.
Remote control functions for CD players: prev, next, stop, play, pause, repeat, fast forward/reverse.
Soft key operations for CD player track selection, programming, and display modes.
Instructions for cleaning the transport platter and disc clamp using Blu-tak, avoiding solvents.
Technical specifications for the CDS CD player, including frequency response, output level, and dimensions.
Technical specifications for the CDX CD player, including frequency response, output level, and dimensions.
Technical specifications for the CD5 CD player, including frequency response, output level, and dimensions.
Details of Naim Audio Limited and the products covered by the declaration.
List of safety and EMC standards that the Naim products comply with.
To Next Page
