Need help?Do you have a question about the Nakamichi MB-1s and is the answer not in the manual?
Lists product codes for MB-1s, MB-2s, and MB-3s.
Lists supported geographical destinations for the product.
Provides safety notices and leakage current checks for service.
Explains the voltage selector setting on the rear panel.
Instructions for safe handling of the laser pickup, including grounding.
Procedure to check stocker operation upon power-up.
Lists packaging components and accessories.
Step-by-step procedure for removing the mechanism assembly.
Instructions for removing the top cover of the mechanism.
Procedure for drawing out the tray assembly from the mechanism.
Instructions for removing the laser pickup assembly.
Procedure for removing the tray assembly.
Procedure for removing the drive unit section.
Steps for removing the right side chassis section.
Procedure for removing the left side chassis section.
Steps for removing the stocker and main chassis sections.
Procedure for positioning gears after replacement in the right chassis.
Steps for positioning the tray assembly on the mechanism.
Specifies lubricants for various parts during replacement.
Lists required measurement instruments like oscilloscopes and meters.
Details the components of the CD player test unit set.
Diagram showing component locations on the Main P.C.B. for adjustment.
Diagram showing component locations on the DAC P.C.B. for adjustment.
Instructions for presetting semi-fixed volumes before adjustment.
Procedure for connecting the test unit for adjustments.
Step-by-step procedures for various electrical adjustments and checks.
Exploded view of the mechanism assembly.
Exploded view of the front escutcheon section.
Exploded view of the mechanism assembly (A02).
Exploded view of the right side chassis section.
Exploded view of the main chassis section.
Exploded view of the drive unit section.
Component layout diagram for the main P.C.B.
Component layout diagram for the DAC P.C.B. (MB-1s).
Component layout diagram for the transformer P.C.B.
Component layout diagram for the power switch P.C.B.
Component layout diagram for the key P.C.B.
Component layout diagram for the display P.C.B.
Component layout diagram for the headphone P.C.B.
Pin description and function for the mechanism controller IC.
Diagram and pinout for TC4584BP inverter IC.
Diagram and pinout for TC74HC00AP NAND gate IC.
Diagrams and pinouts for various operational amplifier ICs.
Diagram and function for the LB1638M motor driver IC.
Diagrams and pinouts for DAC ICs.
Diagram and function for the SM5841CP digital filter IC.
Diagram and function for the BA6296FP driver IC.
Overall system block diagram for the MB-1s model.
Overall system block diagram for MB-2s and MB-3s models.
Block diagram showing the remote control receiver and display interface.
Wiring diagrams for AC input and transformer connections for different regions.
Wiring diagram showing interconnections between various PCBs.
Wiring diagram illustrating connections within the mechanism section.
Detailed schematic for the DAC circuit of the MB-1s.
Technical specifications for the main CD player unit.
Technical specifications for the remote control unit.
List of accessories supplied with the product.
To Next Page
General
