Page 55
7-4 Replacing the Rear Glass
1. Remove the upper rear maintenance door from the Target Cabinet.
2. Remove 4off pozi flange head screws (M5x12) and remove the Chip Slope (L).
3. Remove 4off pozi flange head screws (M5x12) and remove the Chip Slope (R).
4. Remove the 4off Button head screws (M5x35) and remove the window plates.
5. Remove the glass in the direction of the arrow in the diagram below.
6. Reassemble in reverse order.
Pozi flange screws
(M5x12)
Light Guard
Button head screw
(M5x35)
Window Plate
Button head screw
(M5x35)
Chip Slope (L)
Launcher Assy
Chip Slope (R)
Rear Glass
Rear Glass
To Next Page
Loading...
