NAMCO Ridge Racer 2 Upgrade Manual

namco e
RAVE RACER”
1 .O SPECIFICATIONS
1.1
Conversion Game Specifications
Power Supply:
Monitor:
RIDGE RACER 2’”
Upgrade Kit Manual
Switching Power Supply, 200W
1 Standard 25” or 27” color monitor
1.2 Kit Specifications
Part No. RVOI -04432-00
1
PCB ROM Kits
2 ea. ’
Harness adapters
2 ea.
Marquee
1 ea.
Decals 1 set
1.3
Game Conversion Overview
The Rave Racer upgrade kit consists of new Rave Racer PCB components, wire harness
adapter cables, new marquee and decals.
The kit can be installed in either the original
RR2 two-player cabinet or the RR2 single-player upright cabinet.
Note: Each Rave Racer upgrade kit contains parts to convert TWO driver positions
2.0 INTRODUCTION
This manual provides installation instructions for the Rave Racer upgrade kit. inspect the
kit contents, compare against the parts list in the back of this manual, and notify your
distributor and/or shipping carrier about any missing or damaged parts.
3.0 INSTALLATION
3.1 Precautions
1.
2.
Before replacing any parts, turn the AC power OFF and unplug the game.
The game’s video monitor chassis,
when exposed, presents a HIGH
VOLTAGE shock hazard.
If it becomes necessary to work in the back of the
game while the power is on, use extreme care to avoid touching the monitor.

NAMCO Ridge Racer 2 Specifications

General

Brand	NAMCO
Model	Ridge Racer 2
Category	Arcade Game Machines
Language	English