76 Getting Started Getting Started
G E T T I N G S TA R T E D///
First, let’s make sure that your Nanit will get
a strong Wi-Fi signal in your nursery.
Place the Wall Mount down in an upright position
and attach the Nanit Camera. When you feel a click,
the camera is properly connected.
Connect the Wall Mount USB to the power adapter, and
plug the adapter into your electrical outlet.
Within less than a minute, you should see a flashing light
from the back of the camera.
Snap the camera
into the wall mount
until you feel a click.
To Next Page
Loading...
