3
Detailed Description
1. Angle Fixing Knob: Allows for adjusting and fixing the direction of light in tilt.
2. L Shaped Bracket: Designed for connecting the light to the light stand and adjusting the direction of light.
3. Bracket Fixing Knob: For locking the light fixture and stand, and adjusting the horizontal direction of light.
4. Lock Catch: For mounting and dismounting reflector and other accessories.
5. Reflector: For gathering light to improve the central illumination.
6. LCD Display: For displaying various function operations and data.
7. Left Knob: For adjusting the DIM and scrolling through different selections.
8. DC Power Socket: DC power input.
9. Power Switch: For switching on/off the fixture.
10. DMX In/Out: Connect to 1/2 DMX adapter cable for DMX signal input and output
(Note: 1/2 DMX adapter cable is sold separately).
11. Right Knob: For selecting various functions.
12. MODE Button: For switching between CCT/HSI/EFFECT/MENU modes.
13. USB Port: For updating the firmware.
To Next Page
Loading...
