What to do if my NANLITE Compac 100B can not light up?
If your NANLITE lighting equipment cannot light up, first ensure the fixture is not in the "off" position. Next, check the connection between the power cord plug and the fixture to make sure it is not loose. Finally, pull out the fuse base to check if the fuse has disconnected.
Why is my NANLITE Compac 100B Lighting Equipment lamp flickering?
If your NANLITE lighting equipment lamp is flickering, it may be due to the voltage being outside of the specified parameters. Also, verify that there are no high-temperature objects near the light that could be causing the operating environment temperature to be too high.
Provides key specifications including LED quantity, voltage, power, and color temperature.
An illustration showing the physical components of the LED studio light fixture.
Explains the function of each numbered part of the fixture, like knobs and sockets.
Step-by-step guide on how to properly install and operate the LED studio light.
Crucial safety warnings regarding product handling, power, and environmental conditions.
General advisories for product use, maintenance, and storage to ensure longevity.
Lists the items included in the package with the Compac 100B LED Studio Light.
Addresses common malfunctions like the light not turning on or flickering, with solutions.
General| Power Output | 100W |
|---|---|
| Color Temperature | 2700K - 6500K |
| Dimming Range | 0-100% |
| Power Consumption | 100W |
| Cooling System | Passive Cooling |
| Control | DMX |
| Beam Angle | 120° |
| Power Source | AC100-240V 50/60Hz |
| Input Voltage | 100-240V |
| Mounting | Bowens Mount |
To Next Page