What to do if my NANLITE Compac 200 can not light up?
If your NANLITE lighting equipment cannot light up, first ensure the fixture is not in the "off" position. Next, check the connection between the power cord plug and the fixture to make sure it is not loose. Finally, pull out the fuse base to check if the fuse has disconnected.
Why is my NANLITE Compac 200 Lighting Equipment lamp flickering?
If your NANLITE lighting equipment lamp is flickering, it may be due to the voltage being outside of the specified parameters. Also, verify that there are no high-temperature objects near the light that could be causing the operating environment temperature to be too high.
General| Wattage/Power Output | 200W |
|---|---|
| Light Source | LED |
| Color Temperature | 5600K |
| CRI (Color Rendering Index) | ≥96 |
| Weight | 2.5 kg |
| Power Supply/Source | AC 100-240V, 50/60Hz |
| Beam Angle | 120° |
| Dimming | 0-100% |
| TLCI | 95 |
To Next Page