6
④When removing the accessory, push and hold the
release button on the adapter and rotate according
to the direction shown on the adapter until the
accessory is free to be removed from the adapter.
①Slide 2*NP-F batteries onto
the battery holder
②Mount the light onto the receiver
on the grip and lock.
③Ensure the light is switched off,
connect DC plug into the DC
power socket.
⑤When removing the adapter, push and hold the
lock catch on the fixture and rotate according to
the direction shown on the light until the adapter
is free to be removed from the light.
3. Installation of Battery Grip
To Next Page
Loading...
