EasyManua.ls Logo

NANO 2 Series - 1. GENERAL INFORMATION; Document Introduction; Support and Manufacturers Details

NANO 2 Series
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 4
1. GENERAL INFORMATION
This manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine readable form without prior consent in wring from
nano-puricaon soluons. It may not be distributed through the internet or computer bullen board systems
without prior consent from nano-puricaon soluons limited.
1.2 Support and Manufacturers Details
NOTES: highlight important secons of informaon where parcular care and aenon should be paid.
CAUTIONS: indicate any situaon or operaon that may result in potenal damage to the product,
injury to the user, or render the product unsafe.
Annotaons:
1.1 Document Introducon
This manual provides factory prescribed installaon and maintenance procedures for a nano-puricaon soluons
Series 2 Breathing air dryer. The procedures illustrated in this document are only to be performed by fully trained
competent authorized personnel. For further informaon regarding the procedures outlined in this document
contact nano-puricaon soluons before proceeding.
Read this document carefully before aempng to install or operate the dryer. This document should be
permanently available at the dryer installaon site and be kept in an easily accessible place alongside the dryer.
©2015 nano-puricaon soluons ltd.
Product: Series 2 - Breathing Air Purier
Models: NBA-070, 090, 110, 120.
Doc no: 17-110-0491
Issue: 001
nano-purication solutions
11330 Vanstory Drive
Huntersville, NC 28078
USA
Telephone: (704) 897-2182
Fax: (704) 897-2183
Internet: www.n-psi.com
E-mail: support@n-psi.com