Need help?Do you have a question about the NANO FONT and is the answer not in the manual?
Power| current draw at +12V | 22 mA |
|---|---|
| current draw at -12V | 25 mA |
| current draw at +5V | 0 mA |
Ports & Interfaces| input signal voltage range | ±10 V |
|---|---|
| output signal voltage range | ±10 V |
| input impedance | 100 kΩ |
Weight and Dimensions| dimensions | 30x128.5 mm |
|---|---|
| depth | 20 mm |
Ensure correct power cord polarity to prevent damage to electronic circuits.
Overview of FREQ (Cutoff) and RES (Q) knobs and their function.
Details on CVF, OCT, and CVR inputs and their attenuverter controls.
Adjusts the filter's cutoff frequency (fc) and sound character.
Adjusts filter emphasis, enabling self-oscillation as a sine wave VCO.
Connect CV, listen, and adjust trimmer resistor for accurate note reproduction.
To Next Page