NanoEnTek Frend system - Page 33

FREND
TM
System © 2012 NanoEntek, Inc.
33
16. Wait until the test is done automatically.
17. After the reaction is complete, the FREND
TM
System starts to
record the fluorescent readings.
18. When the test is done, the cartridge is expelled and the results
are displayed automatically.
FREND
TM
System
operating
procedure
Operation
Caution:
Do not turn off the FREND™ System, while there is a cartridge in the
system. This is a common cause of malfunction.