Before mounting, lay your design out
on a table and power ON to ensure
everything is working.
Clean your surface of dust, moisture and oil. Tape is NOT recommended for textured,
porous, and ceiling surfaces (ie. wallpaper or brick walls). For ceiling installations, or to
learn how to use the screw mount option - go to go.nanoleaf.me/mylines.
To secure your layout, press and push
each of the mounting connectors
against the wall for 30 seconds.
When mounting, grab a friend to help! For the
best result, mount your layout all at once. Or for
larger layouts, mount in closed-loop sections
(triangles, hexagons, etc).
Important Installation Tips
CLOSED-LOOP
ALL AT ONCE
AVOID
To Next Page
Loading...
