Nanoleaf Shapes Triangles / Smarter Kit - Important Installation Tips; PSU Capacity and Layout Planning; Surface Preparation for Mounting; Panel Mounting Pressure

Important Installation Tips
& ----------.----------- ......... _,,
l) 42W
\
t lx • l) SOOx
Make sure you hove enough PSUs for your layout . NOTE: Each standard PSU
supports up to 42W and each Controller supports up to 500 panels. Use our PSU
calculator at nanoleaf . me/myshapes .
& ---------....
-:t.
• 30 s
To mount, apply strong pressure
in o circular motion to the center of
the panel for 30 seconds.
The Controller and Power
Supply con be connected to any
panel in your setup
Before mounting your panels,
clean your surface to be free of
dust, moisture and oil.
Tope is NOT suitable for textured ,
porous, popcorn and ceiling surfaces
(ie. wallpaper or brick walls).