How to fix paper jam in Nanoptix Printer?
If your Nanoptix Printer is experiencing paper jams, here are a few things to check: * Ensure the paper width meets the printer's specifications. * Inspect the paper path for any debris or partial tickets. Open the paper guide, detach the roller, and remove any obstructions. * Verify that the paper's perforation burst strength is within the required specifications.
What to do if Nanoptix Printer does not function when turned on?
If your Nanoptix Printer isn't working when you turn it on, try these steps: * Make sure the printer cables are properly connected at both ends. * Confirm that both the host and power supply are receiving power. * Ensure the tray is fully closed. * Check that the flat cable is correctly and fully inserted into the receptacle at both ends.
General| Print Method | Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Connectivity | USB, Serial, Ethernet |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Print Speed | Up to 8 inches per second (203 mm/s) |
| Power Supply | 24 VDC |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% RH, non-condensing |
To Next Page
