To Next PageTo Next Page
Need help?Do you have a question about the Napa 85-510 and is the answer not in the manual?
General| Input Voltage | 120V AC |
|---|---|
| Amperage | 10A |
| Output Voltage | 12V DC |
| Output Current | 10A |
| Battery Type | Lead Acid |
Safety warnings regarding explosive gases, battery hazards, and proper charging practices.
Guidelines for safe handling, operation, maintenance, and placement of the charger unit.
Critical warnings regarding charger placement and cord handling due to potential hazards.
Personal safety guidelines when working with batteries and the charger.
Procedures for preparing the battery and vehicle before charging.
Instructions for connecting the charger to AC power, including grounding and adapter use.
Guidance on using extension cords with the charger, including wire size requirements.
Recommendations for placing the charger for safe and efficient operation.
Precautions for connecting and disconnecting DC charger clamps to the battery.
Step-by-step guide for charging a battery while it is installed in a vehicle.
Instructions for charging a battery that has been removed from the vehicle.
Methods and factors for determining a battery's state of charge.
Information on factors affecting charging time and a chart for estimations.
Explanation of the switch used to select the battery size for charging.
Explanation of the switch used to select the battery type for charging.
Overview of charging process, automatic shut off, aborted charges, and desulfation mode.
Details on charging completion, maintain mode, notes, relay, fan, and warnings.
Solutions for common troubleshooting issues related to indicator lights and sounds.
Details of the product's limited warranty and customer service contact information.
