Need help?Do you have a question about the Napa 85-8100 and is the answer not in the manual?
General| Voltage | 12V |
|---|---|
| Amperage | 10A |
| Input Voltage | 120V AC |
| Output Voltage | 12V DC |
| Output Current | 10A |
| Battery Type | Lead-Acid |
Essential safety guidelines and warnings for operating the battery charger.
Instructions for assembling the charger handle with provided screws.
Ensures grounding for electric shock reduction and proper outlet connection.
Overview of the digital display, LEDs, and control buttons on the charger.
Explanation of the timer dial functions: ON, OFF, HOLD, and test modes.
Step-by-step guide for performing a battery charge acceptance test.
Procedure for connecting charger clamps to a negative-grounded vehicle battery.
How to check battery state-of-charge using a hydrometer and specific gravity.
Using the Charging Time Chart to estimate recharge time based on RC and voltage.
Formula for calculating recharge time using reserve capacity and amp hours.
Instructions for charging multiple batteries connected in parallel.
Order of performing Starter and Alternator tests; importance of keeping charger unplugged.
To Next Page
