V0.4 draft
2016-03-22
3. Long press Alarm / Bluetooth for 2 seconds to turn on the Bluetooth
connection.
4. Please go back to the “App_Name” App on your smartphone and pair the 70077
device and your smartphone in the App.
5. Only pair the 70077 ACCU-PROBE Bluetooth Thermometer through the
App, not through the Bluetooth settings mode. The App will show the current
Bluetooth devices; choose to let your device connect. If the device list on the
App isn’t showing any thermometer device, please drag down the screen and
refresh the page again.
6. After the App shows up on the main screen, then you can start using the App.
NOTE: THE PROBE MUST BE PLUGGED INTO THE THERMOMETER
IN ORDER FOR THE DEVICE TO WORK PROPERLY.
7. If you cannot connect to App, restart App and disconnect Bluetooth
connection. Restart installation process.
8. For iOS - Go to the Bluetooth Setting page, and look for the thermometer device
name, and press the “I” icon, then user can “forget this device”
9. For Android- Go to the Bluetooth Setting Page, by “Unpairing” the device.
Loss link alert (Out of Range):
1. The BT thermometer will work normally with the Smart Phone within 160 feet
(line of sight). If the device is taken out of the Bluetooth working distance, the
Bluetooth link will be lost. You will see the Bluetooth logo on the LCD display
flashing.
2. Simply bring the Smartphone back to the working distance of Bluetooth, the
device and the App will reconnect automatically. Re-pair and there should not
be any impact to your cooking data stored in the thermometer.
3. The device will try to reconnect to the Bluetooth for ONE hour after loss link
(Bluetooth logo will keep flashing). If this is the case, user must restart the App
and long press the Alarm / Bluetooth button on the device to reconnect
again.
Setting the Selected Food Temperature:
The App has already been programmed with pre-set temperatures for selected types
of food. The user can choose the food for suitable preset temperature via the App.
To Next Page
Loading...
Need help?
General
