Napoleon ACCU-PROBE 70077 User Manual

www.napoleongrills.comN415-0486 MAR 05.18
7
Connect the Thermometer with the Smart
Device (rst me):
Follow these steps to pair your Smart device. Pair it close to the thermometer to eliminate risk of
interference.
1. On your Smart device:
• Ensure you have Internet access and WiFi is turned on in your Sengs. Also ensure Bluetooth® seng
is On. (For subsequent use, ensure Locaon and Sound is turned on.)
• Download and install the app called Napoleon ACCU-PROBE
TM
Applicaon which is available from the
Apple App Store or Google Play store. When prompted, give permission to access les and sengs.
• Aer the app has been installed, open it. If necessary, the app will direct you to the smart device’s
seng page to switch on Bluetooth for installaon.
2. On the ACCU-PROBE
TM
thermometer unit:
Press the Power buon once to turn on the thermometer display.
Hold the Alarm / Bluetooth buon for 2 seconds to turn on Bluetooth®. The Bluetooth® icon will ash
when the thermometer is in pairing mode.
3. On your Smart device:
In the ACCU-PROBE
TM
app, select the ACCU-PROBE
TM
Bluetooth® Thermometer device when it
appears in the list of available Bluetooth devices.
In the inial startup, the app may ask for permission to access to your Smart device les and locaon.
Allow access for the app to be connected.
Once the app is selected, you can start using it.
4. On the thermometer unit: When the Bluetooth® icon is visible but no longer ashing, it is paired with
the app or no longer seeking to pair with a device.
! Note: Pair the Bluetooth® connecon in the ACCU-PROBE
TM
app and not in the device Sengs.
You cannot proceed to use the app unl the ACCU-PROBE
TM
Bluetooth® Thermometer device appears in
the list and is selected.
Quick Troubleshoong:
Refresh or restart the app and/or Bluetooth® thermometer as necessary. Refer to Troubleshoong if any
problem arises.
If necessary, familiarize yourself with basic device sengs such as how to connect / disconnect Bluetooth®
from device Sengs, and download from the App Store or iTunes.
• To close the app on an iPhone (iOS), quickly double-click the Home buon twice and swipe the app
window. Then reopen the app from the home screen icon.
• To close the app on an Android, simply use the back arrow to Home screen or minimize the window
and close out by clicking “X”.
To uninstall the app:
• iOS - Go to the Bluetooth® Seng page, and look for the thermometer device name. Press the “I”
icon and select Forget this device.
• Android - Go to the Bluetooth® Seng page and Unpair or Uninstall the app.
! If the app is not working for various reasons, restart the app and disconnect the Bluetooth®
connecon from the app or device Sengs. Reinstall the app as shown in Steps 1 - 3 above.
! For addional support aer installing the app, refer to the troubleshoong secon or resource links
on the Napoleon website.

Napoleon ACCU-PROBE 70077 Specifications

General

Brand	Napoleon
Model	ACCU-PROBE 70077
Category	Thermometer
Language	English