National Instruments 9923 - Page 2

2 | ni.com | NI 9923 User Guide and Specifications
This user guide describes the features of the National
Instruments 9923 DSUB to Screw-Terminal Connector Block. You
can use the NI 9923 to create custom cables for C Series modules
that use 37-pin DSUB connectors.
Note The NI 9923 is compatible with NI Compact
FieldPoint devices.
Caution Do not remove the NI 9923 circuit board from
the enclosure.
Caution Do not supply hazardous voltages
(>30 V
rms
/42 V
pk
/60 VDC) to the NI 9923.
Caution Before using the NI 9923, read the Operating
Instructions and Specifications for the C Series module to
ensure compliance with safety, EMC, and environmental
regulations.