Need help?Do you have a question about the National Instruments SCB-68A and is the answer not in the manual?
General| Brand | National Instruments |
|---|---|
| Model | SCB-68A |
| Category | Cables and connectors |
| Language | English |
Details the warranty terms and conditions for the SCB-68A and software media.
Outlines the publication's copyright laws and reproduction restrictions.
Provides locations for EULAs and third-party legal information.
Lists National Instruments trademarks and other product/company names.
Lists the required hardware, software, and tools for SCB-68A setup.
Provides safety cautions and initial steps for setting up the SCB-68A.
Explains how to configure switches for direct signal passthrough.
Describes using the SCB-68A with Multifunction I/O (MIO) DAQ devices.
Details methods for mounting the SCB-68A to a panel or DIN rail.
Explains the process and equipment for modifying the SCB-68A board.
Summarizes recommended input configurations for various signal sources.
Describes signal sources not connected to building ground and their connection methods.
Explains signal sources connected to building ground and potential issues.
Details how to use the SCB-68A's built-in temperature sensor for CJC.
Explains the principles and applications of lowpass filters for analog signals.
Explains the principles and applications of highpass filters for analog signals.
Describes adding components for measuring current up to 20 mA.
Explains how to use voltage dividers to condition signals exceeding DAQ input limits.
Shows circuitry and pad configurations for analog output channels.
Explains lowpass filtering principles for analog output signals.
Details using voltage dividers to attenuate analog output signals.
Shows circuitry for PFI 0 digital trigger input.
Explains lowpass filtering for digital trigger input signals.
Details using voltage dividers for digital input attenuation.
Explains calculating voltage divider values for digital input signals.
Shows the +5 V power supply circuit on the SCB-68A.
Describes the self-resetting fuse protecting the +5 V power input.
Specifies the safe voltage limits for connecting to the SCB-68A.
Details the power consumption characteristics of the SCB-68A.
Lists dimensions, weight, connector types, and wire gauge.
Mentions safety standards met by the product for laboratory use.
Lists EMC standards and emissions classifications the product meets.
Points to NI's online resources like KnowledgeBase and drivers.
Describes direct technical support and training access.
Provides information on NI's training and certification programs.
To Next Page
