Need help?Do you have a question about the National Instruments GPIB-USB-HS and is the answer not in the manual?
General| Interface Type | GPIB to USB |
|---|---|
| GPIB Ports | 1 |
| Maximum GPIB Devices | 14 |
| Operating System Compatibility | Windows, Linux, macOS |
| Supported Standards | IEEE 488.1, IEEE 488.2 |
| RoHS Compliant | Yes |
| GPIB Standard | IEEE 488.1, IEEE 488.2 |
| Maximum Transfer Rate | 8 MB/s |
| GPIB Connector | 24-pin |
| USB Connector | Type B |
| Operating Temperature | 0 °C to 50 °C |
| Power Source | USB Powered |
| Bus Interface | USB 2.0 |
Critical warnings regarding the use of NI products in critical systems.
Step-by-step instructions for installing the AT-GPIB/TNT (PnP) interface.
Installation steps and crucial grounding advice for GPIB-USB interfaces.
Guide for installing PCI, PCIe-GPIB, and related interface cards.
Installation procedures and critical grounding advice for PCMCIA-GPIB.
Installation procedures and grounding advice for NI ExpressCard-GPIB.
Step-by-step instructions for installing the PMC-GPIB interface.
Guide for installing PXI-GPIB and PXI-8232 interface cards.
Steps to install the GPIB-ENET/100 network interface.
Detailed steps for network parameter configuration via the utility.
How to modify IP address, hostname, and other network parameters.
Steps to install the GPIB-ENET/1000 network interface.
Accessing the Web page and changing network parameters.
To Next Page
