© National Instruments Corporation I-1 NI 660x User Manual
Index
A
accessories, 1-3
ASIC
pad synchronization, 2-2 to 2-4
power-on state, 3-3
B
backplane clock
OCXO, 2-9, 2-9 to 2-10
phase locking, 3-17
C
cables, 1-3
calibration, 2-11, 2-12, A-2
calibration certificate (NI resources), A-2
CompactPCI, 1-1
connector pinout, 3-6 to 3-7
conventions used in the manual, vii
counters
counter applications, 3-15
Counter n Auxiliary signal, 3-14
Counter n Gate signal, 3-13
Counter n Internal Output signal, 3-14
Counter n Source signal, 3-10
counter pairs, 3-15
crosstalk, 3-3, 3-19, 3-20
D
data transfer
counter applications, 3-15
DMA channels, 2-8
transfer rates, 2-8 to 2-9
Declaration of Conformity (NI resources), A-1
diagnostic tools (NI resources), A-1
digital filter
description, 3-1 to 3-3
example (figure), 3-2
pad synchronization, 2-2
settings (table), 3-3
digital I/O, 2-1
digital synchronization, 2-2 to 2-4
DMA, 1-1
counter applications, 3-15
transfer rates, 2-8 to 2-9
transfer rates (table), 2-8
documentation
conventions used in the manual, vii
NI resources, A-1
related documentation, viii
drivers (NI resources), A-1
duplicate count prevention, 2-4 to 2-7
application that prevents (example), 2-7
application that works correctly
(example), 2-5
application that works incorrectly
(example), 2-6
when not to use, 2-7
when to use, 2-7
E
examples (NI resources), A-1
F
field wiring considerations, 3-19
filter, digital
description, 3-1 to 3-3
example (figure), 3-2
pad synchronization, 2-2
settings (table), 3-3
To Next Page
Loading...
