2 | ni.com | NI PXIe-4464 Calibration Procedure
Documentation
Consult the following documents for information about the NI PXIe-4464, NI-DAQmx, and
your application software. All documents are available on ni.com and help files install with the
software.
Test Equipment
Table 1 lists the equipment recommended for the performance verification and adjustment
procedures. The test instrumentation requirements are the same for each input connector variant.
If the recommended equipment is not available, select a substitute using the minimum
requirements listed in the table.
NI PXIe-4464 Getting Started Guide
NI-DAQmx driver software installation and hardware setup
NI PXIe-4464 Specifications
NI PXIe-4464 specifications and calibration interval
NI-DAQmx Readme
Operating system and application software support in NI-DAQmx
NI-DAQmx Help
Information about creating applications that use the NI-DAQmx driver
LabVIEW Help
LabVIEW programming concepts and reference information about NI-DAQmx
VIs and functions
NI-DAQmx C Reference Help
Reference information for NI-DAQmx C functions and NI-DAQmx C properties
NI-DAQmx .NET Help Support for Visual Studio
Reference information for NI-DAQmx .NET methods and NI-DAQmx .NET
properties, key concepts, and a C enum to .NET enum mapping table
To Next Page
Loading...
Need help?
General