National Instruments PXI-8360 - Connecting Additional Expansion Chassis to a System; Using a MXI-Express x1 Copper Cable

Set Up Your MXI-Express x1 System 4 ni.com
Connecting Additional Expansion Chassis to a System
Using a MXI-Express x1 Copper Cable
Refer to the Terminology section for more detail on the items in this list.
Equipment Needed
❑ Chassis (or embedded controller with ExpressCard slot) to daisy-chain
from
❑ Expansion chassis to daisy-chain to
❑ MXI-Express x1 copper cable
❑ A MXI-Express x1 host board and target board that is appropriate for
the host system slot and target chassis. Refer to Table 2 for more
information.