National Instruments RMX-4120 User Manual

© National Instruments | 2-23
RMX Programmable Power Supplies User Manual
Figure 2-28. Selecting CONFIG Parameters
Note CF00, and CF40 are used to execute operations. CF30 to CF36, CF50,
and CF51 are read-only parameters used to display the status of the RMX
programmable power supply. You cannot set the values of any of these CONFIG
parameters.
Note The SET key blinks when you have selected a CONFIG parameter whose
setting you must confirm by pressing SET (CF00, and CF40).
CONFIG key
CONFIG key
*
CONFIG key
CONFIG key
Displayed only when the RMX series
is being used as a slave unit
CONFIG key
CONFIG key
Displayed only when the
LAN interface is in use
CF00
CF01
CF19*
CF20
CF21
CF25
VOLTAGE knob
Used to select
the value or the
parameter to
display.
CONFIG key
Used to select
the parameter
number.
CURRENT knob
Used to select
the parameter
number.
Measured value display
System settings
Interface settings
. . .
. . .
LAN settings
(Display)
LAN settings
(Parameter)
．．．
CF30
CF31
CF36
．．．
CF40
CF41
CF47
CURRENT knob
CURRENT knob
CURRENT knob
CURRENT knob
USB/RS232C
settings
CF50
CF51
CF52
CURRENT knob

National Instruments RMX-4120 Specifications

General

Brand	National Instruments
Model	RMX-4120
Category	Power Supply
Language	English