Need help?Do you have a question about the National Instruments RMX-4123 and is the answer not in the manual?
General| Number of Outputs | 1 |
|---|---|
| Input Voltage | 100 to 240 V AC |
| Input Frequency | 50/60 Hz |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 70 °C |
| Interface | USB, LAN |
| Efficiency | 85% |
Details on how to turn on the RMX programmable power supply.
Important factors to consider when connecting different types of loads to the RMX supply.
Instructions for making electrical connections to the RMX power supply's output terminals.
How to display and set OVP and OCP limits on the RMX power supply.
Guides on interacting with the RMX power supply's front panel controls.
How to turn the RMX power supply output on and off and manage its state.
Description of the RMX power supply's Constant Voltage (CV) and Constant Current (CC) modes.
Step-by-step guide to operating the RMX supply in CV or CC mode.
Overview of the RMX power supply's built-in protection features and alarm indications.
How to configure and activate various protection functions on the RMX power supply.
Details on configuring system settings for the RMX programmable power supply.
How to save and recall RMX power supply settings using preset memory slots.
How to control the RMX power supply's output voltage using external signals.
How to control the RMX power supply's output current using external signals.
Using external contacts to turn the RMX power supply's output on or off.
Instructions for configuring and operating multiple RMX units in parallel.
Guidelines for connecting and operating RMX units in series for higher voltage output.
Step-by-step instructions for performing calibration on the RMX power supply.
To Next Page
