Need help?Do you have a question about the National Instruments RMX-4125 and is the answer not in the manual?
General| Power Rating | 1250 W |
|---|---|
| Input Voltage | 100 to 240 VAC |
| Input Frequency | 50/60 Hz |
| Operating Temperature Range | 0 to 50 °C |
| Storage Temperature Range | -20 to 70 °C |
| Form Factor | 1U Rackmount |
| Control Interface | Ethernet |
Details various protection mechanisms like OVP, OCP, and alarm indications to safeguard the unit and load.
Explains how to control the output voltage externally using voltage or resistance sources.
Details external control of output current using voltage or resistance sources.
Describes how to remotely control the output state (on/off) using external contacts.
Guides on connecting and operating multiple units in parallel for increased current capacity.
Provides instructions for connecting and operating units in series to increase output voltage.
Outlines the steps for calibrating the RMX programmable power supply to ensure measurement accuracy.
Helps diagnose and resolve issues where the power supply fails to turn on when the power switch is activated.
Guides users on troubleshooting scenarios where the output terminals show no voltage or current.
Addresses issues preventing correct setting of output voltage or current values due to protection limits.
To Next Page
