Native Instruments Audio 4 DJ User Manual

Getting Started: AUDIO 4 DJ – 14
1 - Control Panel
Click on the Control Panel Button to open the Control Panel. The Control Panel is explained
in detail in the AUDIO 4 DJ User’s Manual.
2 - USB Connection Monitor
This status LED displays whether the AUDIO 4 DJ is connected to your computer or not.
The USB Connection Monitor LED is black (switched off) if the AUDIO 4 DJ is not con-
nected to your computer.
The USB Connection Monitor LED is lit green if the AUDIO 4 DJ is connected to your
computer.
3 - Input Mode Selector
The InPut Mode SeleCtor selects the mode for the input channels A and B.
Line: Select this if your setup utitilizes line-level audio sources like CD/DVD players, key-
boards, a mixer or other computer audio interfaces.
Phono: Choose this mode for use with a turntable.
4 - Input Gain Selector
This controls the input levels of the Phono Input Mode. It is not available in Line Mode!
!
To change any settings, the
AUDIO 4 DJ must be connected
to your computer via USB 2.0.
!
To change any settings, the
AUDIO 4 DJ must be connected
to your computer via USB 2.0.

Native Instruments Audio 4 DJ Specifications

General

Brand	Native Instruments
Model	Audio 4 DJ
Category	Accessories
Language	English