EasyManua.ls Logo

Native Instruments O Kore 2 - Page 172

Native Instruments O Kore 2
236 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KORE 2 – 172
two middle bands are peak equalizers where the gain changes apply to a
band around a center frequency with controllable bandwidth.
Label Function Range Unit
Low Gain Sets the amount of volume change applied to the lowest band. -20..+20 dB
Low Frequency
Sets the frequency of the low shelving equalizer. All frequencies below this
frequency are modied by the equalizer, i.e., their gains are changed according
to the [Low Gain] control.
2..4000 Hz
Mid 1 Gain
Mid 2 Gain
Sets the amount of volume change applied to the two middle bands respectively. -20..+20 dB
Mid 1 Frequency
Mid 2 Frequency
Sets the center frequencies of the two middle bands, respectively. All frequency
gain around these center frequencies – in a range depending on the [Mid 1/2
Bandwidth] controls – is changed by an amount controlled by the [Mid 1/2 Gain]
controls.
40..8000/
80..16000
Hz
Mid 1 Width
Mid 2 Width
Sets the width of the two middle frequency bands respectively. 0.1..4
Oc-
taves
High Gain Sets the amount of volume change applied to the highest band. -20..+20 dB
High Frequency
Sets the frequency of the high shelving equalizer. All frequencies above this
frequency are modied by the equalizer, i.e. their gain is changed according to
the [High Gain] control.
100Hz…
20kHz
Hz

Related product manuals