Native Instruments O Kore 2 - Page 173

KORE 2 – 173
3.8.26 Pattern Delay
The Pattern delay is an especially clever echo device that enables you to
work with delays as you would when using a step-sequencer. Dene the
time-grid of the steps with the unit knob and set the position of the four
delay taps on the P attern g rid . Individual F eedBaCK , P an and l eVel controls
for every “track” of the pattern are also provided.
This effect is well-suited for altering drums and percussion, but be creative
and try it on anything else for interesting rhythmic echoes.
Label Function Range Unit
Mix
Sets the balance between the dry, unprocessed signal and the “wet” (l-
tered) one.
0..100 %
FX In Switches the signal input on or off. On/Off
Delay Unit
Sets the time base of the pattern grid. This is the time-unit for one step. At a
Unit of 1/8 the grid has a length of two bars.
1/64..1/8 Bars
Delay Fine
Fine tuning of the time base of the grid. This can be used to produce
shufe effects.
-33..+33 %