• Tremolo Auto Enables you to play all notes as tremolo when the Tremolo slider is slightly
above minimum.
YANGQIN includes four tremolo articulations in total. The Tremolo slider can be used to control the
sustained Tremolo articulation. The Tremolo slider does not affect the remaining three tremolo
articulations (Trem Short, Trem Oct, and Trem Velo), but they can be assigned to specic scale
notes using the Scale Editor. For more information, see Scale Editor.
The tremolo articulation has to be triggered either by using a keyswitch, or
alternatively enabling the Tremolo Auto control. To read more about keyswitches and
their mapping, see Mapping.
5.3. Sound Presets
To the top right of the interface, you will see the Sound Preset menu. From here, you can browse
through presets that affect the mix of the Instrument. The presets are useful for different mix
applications, such as making the instrument play only in mono or using an ambient setting to
push the instrument further back in the mix.
The Sound Preset menu
You can select a Sound Preset in one of two ways:
Menu
To select presets using the Sound Preset menu:
1. Click on the menu to view all available Sound Presets.
2. Click on a Sound Preset.
→ The selected Preset is loaded and the sound of the Instrument will change.
Buttons
To select presets using the buttons:
OVERVI E W OF Y A NGQIN 8
To Next Page
Loading...
Need help?
General
