5 Connecting accessories to Aurical Aud
It is a general rule for all electrical equipment used in the proximity of the client that:
• The connected equipment must comply with IEC 60601-1 except for the PC, and equipment connected to the line in
and the line out sockets of Aurical Aud.
See also General warnings ► 45.
For a detailed description of the connection panel, see the Aurical AudReference Manual.
Connection panel - Aurical Aud
A. PC/USB connection
B. Powered USB connections for accessories
C. External power supply
D. Sound field speaker output (optical digital line-out)
E. Sound field speaker output (coaxial digital line-out)
F. Sound field speakers (power output)
G. Insert earphones
H. Headphones - air conduction
I. Patient Responder
J. Bone conductor
K. Speaker, Analog (line output)
L. Line-in
M. Operator monitor headset - headphones
N. Operator monitor headset - boom microphone
O. Counseling and Simulations headphones
P. Talk-back microphone
Note • Blue corresponds to Left and red corresponds to Right.
Warning • Use only the power supply provided by Natus.
Warning • Avoid connecting or disconnecting the hearing instrument while the connector light indicator is lit.
Warning • When you connect other electrical equipment to Aurical Aud, remember that equipment that does not
comply with the same safety standards as Aurical Aud can lead to a general reduction in the system's safety level.
Aurical Aud
7
5 Connecting accessories to Aurical Aud
To Next Page
Loading...
