Need help?Do you have a question about the Nauticam NA-BMPCC6K and is the answer not in the manual?
General| Brand | Nauticam |
|---|---|
| Model | NA-BMPCC6K |
| Category | Camera Accessories |
| Language | English |
Instructions for safely opening the housing, including operating safety buttons and turning locks outwards.
Guidance on preparing the main O-ring, including lubrication and placement in the groove.
Instructions for installing the CR2032 battery for the vacuum system, noting insulation film removal.
Steps to prepare the camera saddle, including releasing the tray locking lever and attaching to camera.
Instructions for removing the battery holder from the housing by turning locking levers outwards.
Steps to open the battery cage by releasing two locks by pressing them down.
Instructions for preparing the Samsung SSD T5, including loosening the screw and connecting the cable.
Procedure for unscrewing the M28 accessory port cap and inserting the HDMI 2.0 cable through it.
Steps for preparing the port O-ring, cleaning the housing opening, and pushing the safety button.
Procedure to reset the vacuum system after opening the housing or changing the port/lens.
Guidance on soaking the housing in fresh water, operating controls, and inspecting the main O-ring.
Recommendations for annual O-ring replacement and professional servicing of the housing.
To Next Page
