www.NavePoint.com 4 customerservice@navepoint.com
-Leveling
Level the cabinet before attempting to install any equipment into the cabinet. The casters are not designed to provide
long-term support for the cabinet. Use the levelers to provide long-term support. Install the cabinet in a structurally
sound area with a level floor that can bear the weight of the cabinet, all equipment that will be installed in the cabinet
and any other cabinets and/or equipment that will be installed nearby.
1: After the cabinet has been moved to the
installation location, use a carpenter's level
to check the slope of the floor. If the slope is
excessive, choose an alternative location.
2: Use an open-end wrench to lower each
leveler until it contacts the floor.
3. Enclosure Configuration
-Door Locks
The front/back door and 4 side panels contain locks that are
lockable with the included keys.
To Next Page
Loading...