17
Now press the reset button on the panel
repeatedly, and the oil ows out.
Lock the valve and press the reset button
again, and the boiler gets ignited.
In case that after removing air completely, the
ignition has failed repeatedly about ve times,
contact the sales agency or the commercial
agency.
Plug the power cord in the outlet.(Checking if
the outlet power is 220V)
Press the power button, and check out if
“COMBUSTION” lamp turns on a little later.
Check out that the boiler is grounded to earth.
(Don’t ground to the gas pipe or a lightening
conductor)
Preparation and checking before
starting operate
To Next Page
Loading...
Need help?
General
