To Next PageTo Next Page
Need help?Do you have a question about the Navien NHB Series and is the answer not in the manual?
General| Type | Condensing Boiler |
|---|---|
| Efficiency | Up to 95% AFUE |
| Fuel Type | Natural Gas or Propane |
| Vent Type | Direct Vent |
| Vent Diameter | 2" or 3" |
| Heat Exchanger Material | Stainless Steel |
| Water Connections | 3/4" NPT |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Warranty | 5-Year Parts |
Crucial safety warnings, gas leak procedures, and installation requirements.
Pre-installation notice specific to Massachusetts state regulations.
Mandated installation and certification of carbon monoxide detectors.
Explains the meaning of hazard symbols used in the manual.
Precautions regarding gas handling and storage of flammable substances.
Lists included items and optional accessories for the boiler.
Technical specifications and ratings for the boiler models.
Identifies key internal components of the boiler through diagrams.
Provides physical dimensions and connection port details for the boiler.
Details found on the boiler's rating plate and their significance.
Procedures for boiler installation, location selection, and wall mounting.
Essential steps and guidelines for installing the space heating system piping.
Instructions for connecting the condensate drain and filling the system.
Water system testing, application considerations, and air removal.
Critical warnings and guidelines for safe electrical connections.
Wiring diagrams for zone pump, DHW tank, and other system configurations.
Instructions for connecting thermostats, DHW devices, and sensors.
Essential warnings and steps for safely connecting the gas supply.
Gas pipe sizing tables and procedures for measuring inlet gas pressure.
Critical warnings, guidelines, and type selection for proper boiler venting.
Approved vent pipe materials and procedures for vent termination.
Instructions for accessing and replacing the internal air filter.
Configuring gas type, altitude, and operation settings via DIP switches.
Critical warnings and steps for safe power supply connection.
Guidelines for water supply, communication cables, and application examples for cascade systems.
Overview, guidelines, and setup procedures for installing a common vent system.
Specifies required termination clearances and maintenance for common vent systems.
Checklist covering all phases of boiler installation, connection, and setup.
Turning the boiler on/off and adjusting space heating and DHW temperatures.
Understanding operating status displays and procedures for resetting the boiler.
Configuring space heating control methods, pump settings, and zone settings.
Configuring DHW demand, control methods, temperatures, and priority settings.
Viewing error logs and other system operational data.
Configuring Building Management System (BMS) communication settings.
Configuring schedules, display settings, and memory backup.
Navigating advanced menus and viewing service information.
Adjusting detailed boiler operation parameters, requiring professional setup.
Steps for setting up and configuring the boiler for cascade operation.
Selecting operational strategies (Comfort, Eco, Boost, Custom) for efficiency.
Configuring external connections and running system diagnostic tests.
Selecting special operation modes and performing air purge procedures.
A table of error codes, their reasons, and self-diagnostic actions.
Instructions and guidelines for converting the boiler for propane or high altitude use.
Information on identifying and selecting correct gas orifices for different conditions.
Detailed wiring diagrams for boiler connections and accessories.
Ladder diagrams illustrating the boiler's control logic and connections.
Guidelines for installing the outdoor temperature sensor.
Explanation and configuration of the Outdoor Reset Control feature for energy efficiency.
Exploded views and part lists for boiler assemblies.
How to obtain service and required details for technical support.
