18
Now press the reset button on the panel
repeatedly, and the oil ows out.
Lock the valve and press the reset button
again, and the boiler gets ignited.
In case that after removing air completely,
the ignition has failed repeatedly about ve
times, contact the sales agency or the
commercial agency.
If ignition fails and the operation stops,
“MISFIRE” lamp turns on. In this case, press the
reset button on the panel.
In case that the ignition fails with pressing the
reset button four or ve times, contact the
sales agency or the commercial agency.
Pressing the power button starts fan motor.
And the boiler gets started, or turning the
“COMBUSTION” lamp on.
How to use
To Next Page
Loading...
