L
Lisa RivasSep 3, 2025
What does Error Code E046 mean on my Navien NFB-175H?
- TTyler HebertSep 3, 2025
Error Code E046 indicates abnormal operation of the heat exchanger overheating sensor. Try an auto reset.
What does Error Code E046 mean on my Navien NFB-175H?
Error Code E046 indicates abnormal operation of the heat exchanger overheating sensor. Try an auto reset.
What does Error Code E001 mean on my Navien NFB-175H Boiler?
Error Code E001 indicates that the heat exchanger is over temperature. You can try an auto reset or a manual reset.
What does Error Code E003 mean on my Navien NFB-175H?
Error Code E003 indicates an ignition failure. Try a manual reset.
What does Error Code E016 mean on my Navien Boiler?
Error Code E016 indicates overheating of heat exchanger. Try a manual reset.
What does Error Code E004 mean on my Navien Boiler?
Error Code E004 indicates false flame detection. Try an auto reset.
What does Error Code E012 mean on my Navien NFB-175H Boiler?
Error Code E012 indicates flame loss. Try a manual reset.
What does Error Code E762 mean on my Navien Boiler?
Error code E762 indicates an abnormal flue gas duct due to a vent pipe not properly inserted. Try an auto reset.
What does Error Code E291 mean on my Navien NFB-175H?
Error Code E291 indicates a supply/return inversion limit. Try a manual reset.
What does Error Code E109 mean on my Navien NFB-175H?
Error Code E109 indicates abnormal operation of the fan motor. Try a manual reset.
What does Error Code E302 mean on my Navien NFB-175H?
Error Code E302 indicates low water pressure. Try a manual reset.
Model | NFB-175H |
---|---|
Heating Capacity | 175, 000 BTU/h |
Input (BTU/h) | 175, 000 BTU/h |
Efficiency (AFUE) | 95% |
Modulation Ratio | 5:1 |
Fuel Type | Natural Gas |
Gas Connection Size | 3/4" |
Vent Size (inches) | 2" |
Category | Condensing Boiler |
Venting | 2" PVC/CPVC |