To Next PageTo Next Page
Why is my Navien NPE-180S not hot enough?
If the water from your Navien Water Heater isn't hot enough, first check the temperature setting on the unit itself. It may be set too low. Also, check for cross-plumbing between the cold and hot water lines.
Why is the water from my Navien Water Heater not hot enough?
If the water from your Navien Water Heater isn't hot enough, first check the water heater's temperature setting. Also, check for cross plumbing between the cold and hot water lines.
What to do if the water from my Navien Water Heater is cold?
If the water from your hot water faucet is cold or turns cold and stays cold, you can try the following: Clean the cold water inlet filter. Also, open the hot water faucet completely. If the unit displays an error code, consult the section on error codes in the manual.
Why is the water from my Navien Water Heater too hot?
If the water from your Navien Water Heater is too hot, check the water heater's temperature setting.
What to do if no water comes out of my Navien NPE-180S?
If no water comes out when you open the hot water tap connected to your Navien Water Heater, ensure that the shut-off valves on the hot and cold pipes are open. If an error code is displayed, refer to the section on error codes in the manual.
How to fix Navien NPE-180S Water Heater error E016?
If your Navien Water Heater is showing error code E016, turn off the system for at least 30 minutes, and then restart it. Also, clean the cold water inlet filter and flush the heat exchanger.
How to troubleshoot Navien Water Heater error code E030?
If your Navien Water Heater displays error code E030, turn off the system for at least 30 minutes, and then restart it. Clean the cold water inlet filter and flush the heat exchanger.
How to resolve Navien NPE-180S error code E110?
If your Navien Water Heater is showing error code E110, ensure that the exhaust pipe is free of obstructions and clean the intake air filter.
How to fix error code E012 on a Navien Water Heater?
If your Navien Water Heater displays error code E012, clean the intake air filter and ensure that the electrical cord is properly grounded.
General| Type | Tankless |
|---|---|
| Fuel Type | Natural Gas or Propane |
| Flow Rate | 9.8 GPM |
| Gas Connection | 3/4 inch NPT |
| Water Connection | 3/4 inch NPT |
| Voltage | 120V |
| Maximum BTU Input | 180, 000 BTU/hr |
| Temperature Range | 98°F to 140°F |
| Venting | 2"/3" PVC, CPVC, Polypropylene |
| Warranty | 15 years heat exchanger, 5 years parts |
| Max. Output BTU | 180, 000 BTU/h |
| Minimum BTU Input | 15, 000 BTU/h |
Procedures for responding to gas leaks and safely storing flammable materials.
Key safety warnings related to installation, including combustibles, electrical shock, and CO poisoning.
Guidelines to prevent burns and ensure safe water temperature settings.
Provides technical specifications for various water heater models.
Guides on selecting an appropriate location for water heater installation.
Details clearances, utilities access, drainage, venting, and proximity to fixtures.
Provides instructions and warnings for securely mounting the water heater.
Explains procedures and safety precautions for connecting the gas supply.
Details how to measure gas pressure for proper water heater operation.
Guides on connecting water supply lines and filtering.
Details connecting an external pump for recirculation applications.
Instructions for installing a required pressure relief valve.
Explains how to connect the condensate drain line and disposal options.
Crucial safety and installation guidelines for venting the water heater.
Guidance on choosing appropriate vent types and materials.
Critical safety and electrical connection guidelines.
Illustrates plumbing options for connecting multiple water heaters.
Introduces the common vent system for multiple NPE units.
Key safety and installation guidelines for common vent systems.
Instructions for installing a condensate drain hose for the common vent system.
Guides on safely adjusting the water temperature setting.
Instructions for accessing and adjusting special operational parameters.
Detailed instructions and safety warnings for converting gas type.
Comprehensive checklist to ensure proper installation.
