42 972G00604102
REMARKS:
1) This table is for reference purposes only. The equipament manufacturer maintenance
table prevails on this.
2) For applications where the engines are strictly required, or used in off-road, the
maintenance should occur in half of the periods indicated above.
3) If the engine remains out of use for a long period, its necessary to turn it on every 2
weeks, and wait until it reach the work temperature.
4) The engine lubricant oil must follow the range of replacement indicated above or the
maximum utilization period of 6 months, what occur first.
5) The coolant liquid must follow the range of replacement indicated above or the
maximum utilization period of 12 months, what occur first.
12 SERIES ENGINE - ACTEON (2 VALV.) MECHANICAL INJECTION
MAINTENANCE PLAN
Daily
250 h
500 h
1.000 h
DRAIN FUEL FILTER √
CHECK LUBRICANT OIL LEVEL √
CHECK COOLING LIQUID LEVEL √
CHECK ENGINE LEAKS √
CHECK TUBES AND CONNECTIONS √
CHANGE LUBRICANT OIL √
CHANGE LUBRICANT OIL FILTER √
CHANGE FUEL FILTER(S) √
CHANGE AIR FILTER √
ADJUST VALVE CLEARANCE √
CHECK DAMPER CONDICTIONS √
TEST THE NOZZLES √
CHANGE BELT √
CHANGE COOLING SYSTEM LIQUID √
TEST INJECTION PUMP √
To Next Page
Loading...
Need help?
General