Do you have a question about the Navistar MaxxForce DT 10 and is the answer not in the manual?
Guidelines for safe work area, equipment, and protective measures.
Definitions of Warning, Caution, and Note for safety communication.
Provides key technical specifications for MaxxForce DT, 9, and 10 engines.
Detailed description of the MaxxForce DT, 9, and 10 engine design and features.
Overview of the ECM, sensors, and their role in engine management.
Diagrams and labels for component locations on the engine (Top, Front, Intake, Exhaust, Rear).
Details on warranty period, required maintenance, and repairs for emission systems.
Specifies the duration and mileage for the California emission system warranty.
Lists specific engine components covered by the emission warranty.
Details parts and conditions excluded from warranty coverage.
Guidelines for using Ultra Low Sulfur Diesel (ULSD) and acceptable fuel blends.
Information on API CJ-4 oil quality, service categories, and viscosity grades.
Details on coolant mixtures, extended life coolant, and contamination.
Signals a serious problem requiring immediate engine shutdown.
Indicates the status of the Diesel Particulate Filter and regeneration needs.
Key checks to perform before operating the engine for safety and readiness.
Step-by-step guide for safely starting the engine.
Procedures for jump-starting a dead battery safely.
Explanation of the system capturing soot and particulates in exhaust.
Features that automatically shut down the engine during extended idle times.
Precautions and procedures for operating the engine in cold temperatures.
System that warns operators of conditions that can damage the engine.
Intervals for service operations based on time, mileage, or fuel consumption.
Detailed steps for performing various maintenance tasks.
Procedure for checking and maintaining the engine oil level.
Guidelines for changing engine oil and filters based on service intervals.
Procedure for draining and refilling the engine cooling system.