SECTION 5 – MAINTENANCE SCHEDULE AND SERVICE PROCEDURES
Service Procedures (cont.)
VIBRATION DAMPER
Service Interval: 193,000 km (120,000 miles) or 5,000 hours
Have the v ibration damper inspected by an authorized service
provider for deterioration of rubber, dents, and runout.
ENGINE VALVE LASH
Service Interval: 193,000 km (120,000 miles) or 5,000 hours
• For inspection procedures, see the M axxForce® DT, 9, and
10 Engine Service Manual.
• Have an authorized service provider adjust the valve lash at
the c orrect service interval.
ENGINE BRAKE LASH
Service Interval: 193,000 km (120,000 miles) or 5,000 hours
• For inspection procedures, see the MaxxForce® DT, 9, and
10 Engine Service Manual.
• Have an authorized service provider adjust the valve lash at
the correct service interval.
INDUCTION SYSTEM
Service Interval: 24 months
Pressure test the air induction system.
• For inspection procedures, see the MaxxForce® DT, 9, and
10 Engine Diagnostic Manual.
• Have an authorized service provider pressure test the air
induction system.
Form No. 1172040R1
Printed in the United States of America Page 87
To Next Page
Loading...
