Why does my Navman MOVE-30/MOVE-50 GPS show 110 kph speed limit?
If your Navman GPS unit consistently displays a speed limit of 110 kph, even when it's inaccurate, it's likely because the unit's manual speed limit is set to this default value. To correct this, navigate to the 'Safety' section within your unit's 'Settings' menu and adjust the speed limit accordingly.
What to do if Navman GPS is not turning on?
If your Navman GPS unit isn't turning on or charging, try connecting it to a computer using a USB cable to charge. If it charges this way, the issue lies with the in-car charger. However, if it still doesn't charge, the problem is with the unit itself.
How to fix Navman MOVE-30/MOVE-50 GPS no signal?
If your Navman GPS isn't acquiring a GPS signal, ensure you are stationary and have an unobstructed view of the sky. If the issue persists, reset the GPS chip via the Settings menu on your device.
Where to find Navman MOVE-30/MOVE-50 GPS product key?
There's no activation needed for your Navman GPS unit to function. The Activation tab in the NavDesk software is specifically for subscriptions, travel books, international maps, and map upgrades. Your device should operate without activation right out of the box.
General| Touchscreen | Yes |
|---|---|
| Spoken Safety Alerts | Yes |
| 3D Junction Views | Yes |
| Landmark Guidance | Yes |
| Text-to-Speech | Yes |
| Lane Guidance | Yes |
| Speed Camera Alerts | Yes |
| Preloaded Maps | Yes |
| Battery | Rechargeable lithium polymer battery |
Guidelines for safe installation and operation in a vehicle, including warnings and cautions.
Precautions for using Navman chargers and internal battery, covering electrical, handling, and disposal safety.
Procedures for turning the Navman on, off, resetting the device, and charging the battery.
Common issues, solutions, and customer support contact information.
Using the FIND wizard to search for locations like addresses, POIs, cities, and postcodes.
Step-by-step instructions for planning a route by searching for a street address.
Viewing traffic information, understanding rerouting, and handling traffic events.
Managing saved locations, including Home, favourites, and recent places.
Introduction to POIs and methods for finding them by category or keyword.
Detailed steps for searching POIs by type, and using keywords for specific searches.
Procedures for backing up, restoring data, and updating the Navman device.
To Next Page