How to fix Navman MY 60T GPS if it can't get a signal?
If your Navman GPS unit is unable to acquire a GPS signal, ensure you are stationary and have a clear, unobstructed view of the sky. If the problem persists, try resetting the GPS chip via the Settings menu on your device.
What to do if Navman GPS is not turning on or charging?
If your Navman GPS unit isn't turning on or charging, attempt to charge it using a USB cable connected to your computer. If it charges successfully, the issue lies with the car charger. If it still doesn't charge, the unit itself is likely faulty.
Why does my Navman MY 60T GPS always show the speed limit as 70 kph?
Your Navman GPS unit might be displaying a constant speed limit of 70 kph because the units are set at a manual speed limit defaulted at 70 kph. You can adjust this setting in the 'Safety' section of your 'Settings' menu.
Where do I find the product key to activate my Navman MY 60T?
There's no need to activate your Navman GPS unit. The Activation tab in the NavDesk software is only for subscriptions, travel books, international maps, and map upgrades. Your unit should work right out of the box without any activation.
What to do if my Navman MY 60T GPS is not showing addresses in my state?
When searching for an address using the 'Find' Menu on your Navman GPS, verify that the correct state is displayed after 'Find in:…'. If the correct state isn't selected, no results will appear.
Guide to using the Navman as a hands-free car kit with a mobile phone.
Safety settings like driver fatigue alerts and speed limit warnings.
To Next Page
General