Why does the Naxa NPB-251 Portable Stereo System sound distorted at high volume?
Sound distortion at high volumes on your Naxa Portable Stereo System can occur if the volume control is set too high. Try lowering the volume to a comfortable level. Also, if you are playing very loud music, try turning off the DBBS function.
What to do if my Naxa NPB-251 CD player skips?
If the CD skips while playing on your Naxa Portable Stereo System, the disc may be dirty or scratched. Try wiping the CD with a clean cloth or using another disc.
How to fix noise on AM or FM broadcast on Naxa NPB-251 Portable Stereo System?
If you are experiencing noise or distorted sound on AM or FM broadcasts with your Naxa Portable Stereo System: - Ensure the station is properly tuned. - If listening to FM, extend the FM telescopic antenna. - If listening to AM, reposition the unit until you get the best reception.
What to do if there is no sound on AM or FM on Naxa Portable Stereo System?
If there is no sound on AM or FM on your Naxa Portable Stereo System: - Make sure the function switch is in the “RADIO” position. - Increase the volume, as it may be set at minimum.
What to do if Naxa Portable Stereo System CD player has intermittent sound?
If your Naxa Portable Stereo System CD player has intermittent sound: - The disc might be dirty or defective; try cleaning or replacing it. - The pick-up lens could be dirty; use a CD lens cleaning disc to clean it. - The player may be subject to excessive shock or vibration; relocate it away from such disturbances.
General| Brand | Naxa |
|---|---|
| Model | NPB-251 |
| Category | Portable Stereo System |
| Language | English |
To Next Page
