Nayax VPOS Touch User Manual

Revision 1.6.4 VPOS Touch User Manual Page 16
Image
No.
Title
Image
Description
1
VPOS
Touch
Connector
VPOS Touch cable connector (same connector for
MDB and Pulse cables).
Note: To disconnect the connector, press the
latch (indicated with an arrow) before pulling
out the cable.
2
External
Antenna
Adapter
(replace
image)
The External Antenna adapter connects to the
board and to the External Antenna that is
provided by Nayax.
3
Sim
Housing
The SIM socket is opened by pulling up and closed
by puling down the socket.
3. Test the following payment cards:
I. Magnetic Card – In case of an error, check the Magnetic Head connection to the
board – Refer to Image 4.
II. Contact Card & Contactless Card - In case of an error, send it to the Nayax
Laboratory
III. In case the speaker is not functional, check the Speaker Connection to the board –
Refer to Image

Nayax VPOS Touch Specifications

General

SAM Slots	2
Operating System	Linux
Communication	4G, Bluetooth
Payment Methods	Magnetic Stripe
Certifications	PCI PTS 5.x, EMV L1 & L2
Operating Temperature	-20°C to 70°C
Supported Cards	Visa, Mastercard, Amex, Discover, JCB, UnionPay