Do you have a question about the NC SW9 and is the answer not in the manual?
Brand | NC |
---|---|
Model | SW9 |
Category | Utility Vehicle |
Language | English |
Checklist items for dealership preparation before handover.
Details skip capacities, safe load limits, and loading procedures.
Explains the hydrostatic steering system and articulation.
Describes the torque converter and four-speed gearbox.
Details the oil-immersed brakes and handbrake function.
Outlines the four-cylinder diesel engine and starting system.
Locates the VIN plate and its importance for machine identification.
Location and activation of the horn.
Location and activation of the beacon light.
Automatic activation when reversing.
Importance of correct fuel quality to prevent engine damage in common rail systems.
Describes types of contaminants and their impact on fuel injection equipment.
Steps to lift the engine canopy using the handle and latch.
Steps to lower and secure the engine canopy.
Step-by-step guide for starting the engine safely.
How to select direction and gear for moving the dumper.
How to increase speed using the accelerator pedal and gear selection.
Methods for reducing speed and stopping the machine, including emergency use of the handbrake.
How to use the steering wheel to control the machine's direction.
Explains the operation of the lever for tipping, lowering, and swiveling the skip.
Emphasizes checking for people and obstructions in low visibility areas before moving.
Rules for ascending/descending inclines, including skip facing direction and gradient limits.
Precautions for crossing gradients on slippery ground to prevent sliding.
Instructions for lowering, raising, and maintaining the Roll Over Protection Structure (ROPS) bar.
Guidelines and limitations for using the dumper to tow implements or loads.
Procedures for loading the dumper onto lorries or trailers.
Specific recommendations for using loading ramps, including angle and winch use.
Identifies points on the dumper for securing it during transport.