7
14. Preset station scan / Answer
Press to automatically scan all your preset stations.
15. Power / Mute
Press to turn the unit on, long press to turn the unit off. In on position
press to mute the volume, press again to reinstate the volume.
16. USB slot
Open the cover to expose the USB slot. Insert your usb device, this
will begin to playback automatically. (Note some files may not play if
this happens please reconfigure tracks into different formats).
17. 3.5mm AUX input
Plug in your 3.5mm cable into your device then into the unit, press the
mode button to select AUX. (Note that the volume of your device will
directly affect the volume of the output from the unit so take caution).
18. Panel open
Press to open the panel so it can be removed to either insert an SD
card or for security.
19. Reset switch
With a sharp object push the reset button to return the unit to factory
defaults. (Note you will loose all saved preferences).
CONTROLS
To Next Page
Loading...