What to do if my NCM PRAGUE Scooter display turns on but the motor doesn't activate?
If the display turns on but the motor of your NCM Scooter does not activate, check the motor plug from the controller. Ensure the plug is fully inserted up to the indicator line, as this connection can be stiff. Handlebar twisting can sometimes cause the plug to loosen if the motor cable lacks sufficient slack.
What to do if the rim of my NCM PRAGUE Scooter has a buckle or loose spokes?
If the rim of your NCM Scooter has a buckle or spokes are constantly coming loose, take your bike to a qualified wheel builder or technician for service. The issue may be as simple as adjusting the spoke tension.
Should I always completely empty my NCM PRAGUE Scooter battery before recharging?
You don't need to completely discharge your NCM Scooter battery every time you use it. However, it is recommended to fully discharge the battery every 2-3 months.
How to check the charge level of my NCM PRAGUE Scooter battery when it's disconnected?
By pushing the power button on the battery of your NCM Scooter, LEDs will light up, indicating the remaining capacity.
Safety precautions for handling and using the battery and charger.
Important safety guidelines for riding the e-bike.
Detailed information about the battery and charger system.
Instructions for charging, using, and storing the battery.
Interpreting error codes displayed on the screen.
A schedule for regular maintenance checks and tasks.
Common issues and solutions for the e-bike.
General| Max Load | 120 kg |
|---|---|
| Display | LCD |
| Category | Scooter |
| Wheel Size | 10 inch |
| Brakes | Disc brakes |
To Next Page
